<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[10月度 月頭朝礼内容]]></title><description><![CDATA[<pre><code>10月度朝礼伝達事項							
							
１・9月8日　・・・　労働災害発生							
							
　ES1 FR の水没リークで、両手押しS/Wで起動させ、ワークをクランプしている間に							
　ワークについているスパッタを取り払おうとして、うっかり手を出してしまい							
　左手の薬指の先端を、ワークとクランプの間に挟み骨折							
							
　『動く設備には手を出さない』という事例							
							
　１）リーク上昇中に、既にワークを手で掴んでいる							
　２）自動アンクランプ中に、既にワークを手で掴んでいる							
							
　これらを無意識にやっている可能性もありますので、注意してください。							
							
　もし、ルールが守れない状況がある場合は、ご相談お願いします。							
							
　それと、現在同じような設備に対し、順次対応していますので							
　クランプし切るまで長押しをお願いいたします。							
							
							
２・ルール違反について							
							
　確信的なルール違反をしている方がいます。							
　・報告なしに離席している							
　・スパッターカバーをしないで手直しをする							
　							
　こういった行動は、うっかりやってしまうような、人間本来のミスとは違い							
　自分でコントロールできる領域です。							
							
　確信的な違反行為をして問題が起きた場合							
　殆どの責任は、本人になりますので、絶対にしないようにお願いします。							
</code></pre>
<p dir="auto"><img src="/assets/uploads/files/1790752080460-c1da37b0-d291-4885-be41-c98dd9bcd271-image.jpeg" alt="c1da37b0-d291-4885-be41-c98dd9bcd271-image.jpeg" class=" img-fluid img-markdown" /></p>
<p dir="auto">中国語 (Chinese)</p>
<p dir="auto">10月份朝礼传达事项</p>
<p dir="auto">1・9月8日 ・・・ 劳动灾害发生						<br />
　ES1 FR的水没检漏作业中，通过双手按下S/W启动，在夹紧工件的同时						<br />
　为了清除工件上的飞溅物，不经意间把手伸了进去						<br />
　将左手无名指尖夹在工件与夹具之间导致骨折						<br />
　这是“不要把手伸向运动中的设备”的案例</p>
<p dir="auto">1）检漏台上升时，已经用手抓住了工件						<br />
2）自动松夹时，已经用手抓住了工件</p>
<p dir="auto">这些动作可能是无意识中做出的，请大家注意。</p>
<p dir="auto">如果遇到无法遵守规定的情况，请与我们商量（汇报）。</p>
<p dir="auto">另外，目前针对类似的设备正在依次进行对应，						<br />
请一直按住直到完全夹紧为止。</p>
<p dir="auto">2・关于违反规则						<br />
有人存在明知故犯的违规行为。						<br />
・未报告擅自离席						<br />
・不使用飞溅防护罩进行返修作业</p>
<p dir="auto">这类行为与因粗心大意而导致的、人类天生的小失误不同，						<br />
而是自己能够控制的范畴。</p>
<p dir="auto">如果因明知故犯的违规行为而引发问题，						<br />
大部分责任在于本人，请绝对不要这样做。</p>
<p dir="auto"><img src="/assets/uploads/files/1790752102196-4b215817-bd6d-4466-9189-e4dc50ff03b5-image.jpeg" alt="4b215817-bd6d-4466-9189-e4dc50ff03b5-image.jpeg" class=" img-fluid img-markdown" /></p>
<p dir="auto">英語 (English)</p>
<p dir="auto">October Morning Assembly Communication Matters</p>
<ol>
<li>September 8th ... Industrial Accident Occurred<br />
During the submersion leak test of ES1 FR, started by pressing dual-hand switches, while clamping the workpiece,<br />
trying to remove spatter on the workpiece, inadvertently reaching in,<br />
getting the tip of the left ring finger caught between the workpiece and the clamp, resulting in a fracture<br />
This is a case of "Do not touch moving equipment"</li>
</ol>
<ol>
<li>Grabbing the workpiece by hand while the leak test table is rising</li>
<li>Grabbing the workpiece by hand during automatic unclamping</li>
</ol>
<p dir="auto">These actions may be performed unconsciously, so please be careful.</p>
<p dir="auto">If there are situations where rules cannot be followed, please consult us.</p>
<p dir="auto">Also, as we are sequentially upgrading similar equipment,<br />
please press and hold until fully clamped.</p>
<ol start="2">
<li>Regarding Rule Violations<br />
Some people are intentionally violating rules.<br />
・Leaving the workstation without reporting<br />
・Performing rework without a spatter cover</li>
</ol>
<p dir="auto">Such actions are different from inherent human errors like careless mistakes,<br />
and are within one's own control.</p>
<p dir="auto">If a problem occurs due to an intentional violation,<br />
most of the responsibility lies with the individual, so please make sure never to do it.</p>
<p dir="auto"><img src="/assets/uploads/files/1790752130455-0c93fe85-ac12-492c-a6c7-e4f5937a028a-image.jpeg" alt="0c93fe85-ac12-492c-a6c7-e4f5937a028a-image.jpeg" class=" img-fluid img-markdown" /></p>
]]></description><link>http://kcsv.sakamotonet.com/topic/22/10月度-月頭朝礼内容</link><generator>RSS for Node</generator><lastBuildDate>Wed, 28 Oct 2026 07:02:31 GMT</lastBuildDate><atom:link href="http://kcsv.sakamotonet.com/topic/22.rss" rel="self" type="application/rss+xml"/><pubDate>Wed, 30 Sep 2026 07:00:11 GMT</pubDate><ttl>60</ttl></channel></rss>